M3 screw shaft 2 phase 10mm mini gear type stepper motor
Description
This is a combination of a miniature stepper motor with a motor diameter of 10MM plus a precision metal gearbox. In addition, we have 6mm, 8mm, 10mm, 15mm and 20mm diameter motors for customers to choose from.
The step angle of this motor is 18 degrees, i.e. 20 steps per revolution. With the deceleration effect of the gearbox, the final motor rotation angle resolution can reach 0.05~6 degrees, which can be used for a variety of requirements and precise control of rotation position.
Customers can match the gear speed ratio according to different requirements of using torque speed, and the gearbox has 1:2 - 1:1000 gear ratio for customers to choose.
Parameters
| Model No. | SM10-816G |
| Motor diameter | 10mm |
| Coil resistance | 30Ω±10%/phase |
| Number of phase | 2 phases |
| Step angle | 18°/step |
| Weight | 15 g |
| OEM&ODM SERVICE | AVAILABLE |
| EFFICIENCY | 10-20% |
Design Drawing
About geared stepper motors
The gear box has high precision, high efficiency and low noise, which makes the product have good reliability.
The power input position of the stepper motor can be in the form of FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures, such as circular shaft, D-shaft and wire bar.
Gearbox Parameters
Application
Geared stepper motors, widely used in Smart home, personal care, home appliance equipment, smart medical equipment, smart robot, smart logistics, smart cars, communication equipment, smart wearable devices, consumer electronics, camera equipment, and other industries.
Customization Service
1. Coil resistance/rated voltage: The coil resistance is adjustable, the higher the resistance, the higher the rated voltage of the motor.
2. Bracket design/slider length: If customers want longer or shorter bracket, there are special design, such as mounting holes, it is adjustable.
3. Slider design: the current slider is brass, it can be replaced with plastic to save cost
4. PCB+cable+connector: PCB design, cable length, connector pitch are adjustable, can be replaced with FPC according to customer's need.
Lead Time and Packaging Information
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by express
Mass production, motors are packed in corrugated cartons with transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
Shipping Method
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai port. (45~70 days for sea shipping)
FAQ
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set customization from design drawing to production.
We are confident we can give you few advice/suggestions for your stepper motor project.
If you are worrying about confidential issues, yes, we can sign a NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors
Send your message to us:
Products categories
-
20mm diameter stepper motor with gearbox 20BY45...
-
12VDC high torque 35mm Geared Stepper Motor 7.5...
-
High precision 35mm planetary gearbox stepper m...
-
10-817G 10mm stepper motor with 1024GB horizont...
-
Micro Gear Stepper Motor 25PM Linear Motor For ...
-
High precision 20mm pm stepper motor with circu...